• ...you'll be pumped

Wilden P200 25 mm (1") Plastic AOD Pump See all Brands

The Wilden® P200 - 1" / 25 mm Advanced™ Series bolted plastic AOD pumps are available in Polypropylene, PVDF or PFA.

They come equipped with the Pro-Flo® Air Distribution System (ADS), which provides the longest-lasting wear parts, on/off reliability, maximum Mean Time Between Repair (MTBR) and lube-free operation.

Elastomers are available in the following materials:
  • Buna-N
  • EPDM
  • Neoprene
  • Polyurethane
  • PTFE
  • Saniflex™
  • Viton®
  • Wil-Flex™

A variety of options, such as ANSI and DIN flanges and NPT/BSPT threads, are available to meet your specific application requirements.

P200

  • Features & Benefits
  • Performance
  • Elastomer

Features & Benefits

  • Higher flow rates/Increased pump output
  • Intrinsically safe
  • Bolted connections for superior containment
  • Variable flow and pressure
  • Shear-sensitive
  • Dry-run capable
  • Portable and submersible
  • Viscous and non-viscous product transfer
  • Large solids passage
  • High suction lift
  • Ease of operation and maintenance

Dependable

  • Longest Mean Time Between Repair (MTBR)
  • Increased On/Off reliability
  • Reduced turbulence
  • Superior torque retention
  • Anti-freezing ADS
  • Reduced internal friction
  • Largest chemical compatibilities

Economical

  • Greater flow per SCFM input
  • Reduced air consumption and kilowatt usage
  • Lower operational costs and downtime
  • Optimized applications

Performance

WETTED HOUSINGS (Water Chambers and Manifolds)

MaterialShip Wt
Polypropylene 10 kg (22 lbs)
PVDF 15 kg (32 lbs)
PFA 18 kg (40 lbs)

NON-WETTED HOUSINGS

MaterialShip Wt
Polypropylene 10 kg (22 lbs)
PVDF 15 kg (32 lbs)
PFA 18 kg (40 lbs)

DescriptionMaterial
Center Block Polypropylene
Air Chambers Polypropylene
Air Valve Polypropylene

FLOW RATE TO 220 LPM (58 GPM)
MAX PRESSURE = 8.6 BAR (125 PSI)

MAXIMUM SUCTION LIFT CAPABILITY

3.6m (11.9") Dry, 9.8 m Wet (32.0")

MAXIMUM DIAMETER SOLIDS

4.76mm (3/16")

DISPLACEMENT PER STROKE

  • Rubber- 0.32 l (.09 gal)
  • TPE- 0.33 l (.09 gal)
  • PTFE Reduced Stroke- 0.22 l (.06 gal)
  • PTFE Full Stroke- 0.3 l (.08 gal)

Elastomer Options

MaterialTemperature Limits
Buna-N -12.2 to +82.2 °C (+10 to +180 °F)
EPDM -51.1 to +137.8 °C (-60 to +280 °F)
Neoprene -17.8 to +93.3 °C (+0 to +200 °F)
Polyurethane -12.2 to +65.6 °C (+10 to +150 °F)
PTFE +4.4 to +104.4 °C (+40 to +220 °F)
Saniflex™ -28.9 to +104.4 °C (+20 to +220 °F)
Viton® -40 to +176.7 °C (-40 to +350 °F)
Wil-Flex™ -40 to +107.2 °C (-40 to +225 °F)

Contact Form