• ...you'll be pumped

Almatec Futur Series AOD Pumps See all Brands

Almatec Futur series pumps

Features

  • Four material versions (T, H, E and SLS) for different applications
  • Three models feature no metal at all (T, H and E)
  • Temperature range up to 200ºC/392ºF (H)
  • Patented, contactless cascade sealing between the product chambers
  • No o-ring sealing in wetted areas
  • Straight-through flow pattern, only one wetted housing part
  • Air control system PERSWING P®, requires no lubrication or maintenance
  • Internal air flow
  • Diaphragms without plates and gaskets, optimized diaphragm geometry
  • Cylinder valves with surface sealing
  • Compact, simple design with few parts, very low space required
  • Machined from solid blocks
  • Easy to dismantle and assemble
  • No fixing elements, such as tie rods, nuts, or clamps
  • Separate pulsation damper available for all materials and sizes
  • Diaphragm and/or stroke sensors can be retrofitted easily
  • Low noise level
  • Assembled in a clean-room line
  • Models
  • Technical Data
  • Performance
  • Spares

Models

Almatec Futur T

Futur T

When delivering acids and caustics, corrosion resistance is of the highest importance, so the center housing is constructed of special PTFE-TFM. Compared to normal PTFE, it has a higher tensile strength and surface density. Parts made of this material are smooth and free of pores, which results in reduced particle generation. The pumps are absolutely metal-free and can be used in temperature ranging up to 130°C (266°F).

Applications

  • Acids
  • Caustics
  • High purity chemicals

Materials

  • Center housing: PTFE-TFM
  • Side housings: Polyethylene

Pump Sizes & Performance

  • 10T (10 l/min / 2.6 gpm)
  • 20T (20 l/min / 5.3 gpm)
  • 50T (50 l/min / 13 gpm)
  • 100T (100 l/min / 26 gpm)

Futur E

The FUTUR E model has been designed to be abrasion-resistant, which is a requirement for pumping slurries. To meet these operational demands, they are constructed of PE (polyethylene). It has a very high abrasion resistance (higher than steel), good impact value and withstands the introduction of slurry particles. Its good chemical properties allow handling both basic and acidic slurries. The FUTUR E is metal-free, with a maximum permitted liquid temperature of 70°C (158°F).

Applications

  • Basic slurries
  • Acidic slurries

Materials

  • Center housing: Polyethylene
  • Side housings: Polyethylene

Pump Sizes & Performance

  • FO 20 (20 l/min / 5.3 gpm)
  • FO 50 (50 l/min / 13 gpm)
  • FO 100 (100 l/min / 26 gpm)

Almatec Futur E

Almatec Futur H

Futur H

FUTUR H model pumps have been designed to operate ideally in hot applications involving acids and caustics. The temperature limit is 200°C (390°F) at max. 2 bar (29 psig).

Applications

  • Hot applications with acids
  • Hot applications with caustics

Materials

  • Center housing: PTFE-TFM
  • Side housings: PTFE conductive

Pump Sizes & Performance

  • 10H (10 l/min / 2.6 gpm)
  • 20H (20 l/min / 5.3 gpm)

Futur SLS

FUTUR SLS model pumps feature stainless-steel (316L, with extremely low carbon content) construction, making them ideal for handling solvents, mixtures of solvents and strippers. The housing parts are machined from a solid block of rolled steel and polished afterwards, the only way in which a pore-free surface can be secured. The pumps can be used in temperature ranges up to 130°C (266°F).

Applications

  • Solvents
  • Solvent mixtures
  • Strippers

Materials

  • Center housing: SS 316 L
  • Side housings: SS 316

Pump Sizes & Performance

  • SL20S (20 l/min / 5.3 gpm)
  • SL50S (50 l/min / 13 gpm)

Almatec Futur SLS

Almatec Futur Omega

Futur Omega

The FUTUR Omega model is the 5th generation of FUTUR pumps. It is entirely constructed of PTFE-TFM, with the option of polyethylene or 316L stainless-steel construction.

New design elements are the Ω-shaped base frame and the rotation prevention of the diaphragm and the center housing. Furthermore, an optimized PTFE diaphragm material is used.

Applications

  • High-end semiconductor

Materials

  • Center housing: PTFE-TFM
  • Side housings: PTFE-TFM (Also available in polyethylene and SS316L materials)

Pump Sizes & Performance

  • FO 20 (20 l/min / 5.3 gpm)
  • FO 50 (50 l/min / 13 gpm)
  • FO 100 (100 l/min / 26 gpm)

Technical Data

Technical Data Data models H, T, E Data model SLS
10 20 50 100 200 SLS 20 SLS 50
Dimensions for pump in mm (inch),
length 185 (7.3) 201 (7.9) 246 (9.7) 303 (11.9) 374 (14.7) 199 (7.8) 245 (9.7)
width 114 (4.5) 150 (5.9) 200 (7.9) 260 (10.2) 330 (13.0) 132 (5.2) 178 (7.0)
height 130 (5.1) 167 (6.6) 222 (8.7) 265 (10.4) 345 (13.6) 154 (6.1) 196 (7.7)
Dimensions for pump with damper in mm (inch),
length 185 (7.3) 201 (7.9) 246 (9.7) 303 (11.9) 374 (14.7) 199 (7.8) 245 (9.7)
width 114 (4.5) 150 (5.9) 200 (7.9) 260 (10.2) 330 (13.0) 158 (6.2) 193 (7.6)
height 245 (9.7) 282 (11.1) 354 (13.9) 428 (16.9) 577 (22.7) 263 (10.4) 305 (12.0)
Nominal port size (NPT) 3/8" 1/2" 1" 1 1/4" 1 1/2" 1/2" 1"
Air connection (NPT) 1/4" 1/4" 1/4" 1/4" 3/8" BSP 1/4" BSP 1/4"
Suction head, dry in mWC (ft.) 1 (3.3) 2.5 (8.2) 3.5 (11.5) 4 (13.1) 4.5 (14.8) 2.5 (8.2) 3.5 (11.5)
Suction head, wet in mWC (ft.) 8 (26.2) 9 (29.5) 9 (29.5) 9 (29.5) 9 (29.5) 9 (29.5) 9 (29.5)
Max. permissible driving pressure bar (psig) 6 (87) 6 (87) 6 (87) 6 (87) 6 (87) 6 (87) 6 (87)

Max. permitted operating temperature Futur H Futur T Futur E Futur SLS
at max. 6 bar (87 psig) 100°C
212°F
100°C
212°F
70°C
158°F
130°C
266°F
at max. 5 bar (73 psig) 130°C
266°F
110°C
230°F
70°C
158°F
130°C
266°F
at max. 4 bar (58 psig) 150°C
302°F
120°C
248°F
70°C
158°F
130°C
266°F2°F
at max. 3 bar (44 psig) 180°C
356°F
130°C
266°F
70°C
158°F
130°C
266°F
at max. 2 bar (29 psig) 200°C
392°F
130°C
266°F
70°C
158°F
130°C
266°F

Performance

Futur 10

Futur 10 performance curve

Futur 20

Futur 20 performance curve

Futur 50

Futur 50 performance curve

Futur 100

Futur 100 performance curve

Futur 200

Futur 200 performance curve

Almatec Futur Spare Parts

All Pumps stock a wide range of Almatec Futur spares, including spare parts kits.

The Almatec spares we stock include:

  • Air Valves
  • Balls
  • Bushings
  • Capillary Rod Assembly
  • Check Body
  • Clamp Bands
  • Diaphragms
  • End Caps
  • End Cap O-Rings
  • Expanded PTFE Kits
  • Fluid Section Repair Kits
  • Gaskets
  • Mufflers
  • O-Rings
  • Oil Bottles
  • Pipe Bushing
  • Pistons
  • Retaining Rings
  • Screens
  • Shafts
  • Valve Balls
  • Seats

Contact Form